倪金禄，天津大学

演讲标题：Mechatronic dynamics modeling and analyzing of a three degree-of-freedom high-speed parallel robot

牛鹏，北京工业大学

演讲标题：A Kinematic Errors Prediction and Accuracy Improvement Method of Guide Rail Based on Assembly and Manufacturing Analysis

王芹，北京工业大学

演讲标题：The Interfacial Bonding Properties and Heterogeneous Nucleation of HfO2(001)/Ni(001) in DZ125 Nickel-Based Superalloy: First Principles Study

陈清远，北京工业大学

演讲标题：An Adjustable Color Saturation Cavity Reflector Enabled by Double-layer Phase-Change Materials

王雪萍，同济大学

演讲标题：Study on the friction-wear performance of brake disc material

陈兴泰，东北大学

演讲标题：Preparation of YFeO3 nanofibers by electrospinning and their gas sensor performance

杜灿阳，郑州轻工业大学

演讲标题：Stability prediction of micro-milling with tool runout and centrifugal force via using FEM and time-domain formulation

马晓勇，兰州理工大学

演讲标题：Experimental study on the micro-structure and cryogenic insulation performance of the novel micro-fiberglass wool blanket

杜喜哲，兰州交通大学

演讲标题：Finite Element Analysis and Topology Optimization of the Impeller Structure of Fog Cannon Fan

徐倩倩，中国船级社

演讲标题：Effects of environmental conditions on performance of Marine high-speed diesel engines

胡家栋，三峡大学

演讲标题：Research on Torsional Vibration of Marine Diesel Generator System Based on Silicon Oil Damper

罗峰，武汉理工大学

演讲标题：Comparative study of the strain gauge and 3D Digital Image Correlation testing methods under hydrostatic conditions of composite shells

熊宇帆，三峡大学

演讲标题：Effect of Electric Field on the High Frequency Tensile Property of Polyurethane Elastomer Based on Molecular Dynamics Simulation

邹春阳，长春理工大学

演讲标题：Experimental study on in-situ laser-assisted turning of tungsten carbide by diamond tool

王志平，上海交通大学

演讲标题：Optimized recrystallization behavior and mechanical properties in a spray formed Al-Zn-Mg-Cu alloy

车建伟，长春理工大学

演讲标题：Study on electrochemical polishing process parameters of SLM-NiTi alloy based on Box-Behnken response surface method

周天文，长春理工大学

演讲标题：Analysis of tool wear and morphology and residual stress of machined surface in hard turning

付光辉，北京卫星环境工程研究所

演讲标题：Development of a portable device for solar absorption ratio measurement

尚圆圆，三峡大学

演讲标题：Hydrophilic/oleophobic copper mesh for oil-water separation

代天灿，三峡大学

演讲标题：Numerical Simulation of Self-oscillating Pulsed Jet Nozzle